TY - JOUR
AU - Nishimura, Dwight G.
AB - Variable‐density k‐space sampling using a stack‐of‐spirals trajectory is proposed for ultra fast 3D imaging. Since most of the energy of an image is concentrated near the k‐space origin, a variable‐density k‐space sampling method can be used to reduce the sampling density in the outer portion of k‐space. This significantly reduces scan time while introducing only minor aliasing artifacts from the low‐energy, high‐spatial‐frequency components. A stack‐of‐spirals trajectory allows control over the density variations in both the kx–ky plane and the kz direction while fast k‐space coverage is provided by spiral trajectories in the kx–ky plane. A variable‐density stack‐of‐spirals trajectory consists of variable‐density spirals in each kx–ky plane that are located in varying density in the kz direction. Phantom experiments demonstrate that reasonable image quality is preserved with approximately half the scan time. This technique was then applied to first‐pass perfusion imaging of the lower extremities which demands very rapid volume coverage. Using a variable‐density stack‐of‐spirals trajectory, 3D images were acquired at a temporal resolution of 2.8 sec over a large volume with a 2.5 × 2.5 × 8 mm3 spatial resolution. These images were used to resolve the time‐course of muscle intensity following contrast injection. Magn Reson Med 50:1276–1285, 2003. © 2003 Wiley‐Liss, Inc.
TI - Fast 3D imaging using variable‐density spiral trajectories with applications to limb perfusion
JF - Magnetic Resonance in Medicine
DO - 10.1002/mrm.10644
DA - 2003-01-01
UR - https://www.deepdyve.com/lp/wiley/fast-3d-imaging-using-variable-density-spiral-trajectories-with-8M2tZ5IiEm
SP - 1276
EP - 1285
VL - 50
IS - 6
DP - DeepDyve
ER -