TY - JOUR
AU1 - Shagar, A. C.
AU2 - Wahidabanu, R. S. D.
AB - In this article, the design, simulation, and construction of a novel wide rectangular slot antenna fed by a 50 Ω coplanar waveguide (CPW) are presented and investigated for multifunctional communication systems. The physical dimension of the antenna is 29 mm (length) × 32 mm (width) × 1.6 mm (thickness). Detailed simulations and experimental investigations are performed to understand its behavior and to optimize for 2.4 GHz wireless local area network (WLAN) and ultra wideband (UWB) operations. The proposed slot antenna is etched on an FR4 substrate with a thickness of 1.6 mm and relative permittivity of 4.4. To improve the impedance matching, a stepped stub structure with CPW feed technique is used. According to the measured results, the proposed antenna has a large bandwidth from 2.1 to 11.6 GHz for voltage standing wave ratio (VSWR) less than 2, totally satisfying the requirement of 2.4 GHz WLAN and UWB systems, while providing the required band notch function from 5.1 to 5.9 GHz. The study of time domain characteristics and surface current distributions also indicate the band‐notched function of the antenna. The radiation patterns display nearly omnidirectional performance and the antenna gain is stable except for the rejected frequency band (5.1–5.9 GHz). Moreover, group delays are within 1.5 ns except for the notch‐band. It is observed that the simulated and experimental results have good agreement with each other. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.
TI - Design and analysis of slot antenna with band notch function
JF - International Journal of Rf and Microwave Computer-Aided Engineering
DO - 10.1002/mmce.20614
DA - 2012-05-01
UR - https://www.deepdyve.com/lp/wiley/design-and-analysis-of-slot-antenna-with-band-notch-function-Hloc50ZUNP
SP - 402
EP - 410
VL - 22
IS - 3
DP - DeepDyve
ER -