Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/kinetics-of-recrystallization-for-twin-roll-casting-az31-magnesium-oknQi6ICxg
References (16)
-
H.J. Frost, M.F. Ashby (1982)
Deformation Mechanism Maps -
S. Park, G. Bae, D. Kang, B. You, N. Kim (2009)
Superplastic deformation behavior of twin-roll cast Mg–6Zn–1Mn–1Al alloyScripta Materialia, 61
-
S. Fatemi-Varzaneh, A. Zarei‐Hanzaki, H. Beladi (2007)
Dynamic recrystallization in AZ31 magnesium alloyMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 456
-
Jiao Zhang, D. Shu, Q. Rao, Bao-de Sun, Gang Chen (2006)
Nucleation and growth of high purity aluminum grains in directional solidification bulk sample without electromagnetic stirringTransactions of Nonferrous Metals Society of China, 16
-
Chuming Liu, Hai-tao Zhou (2006)
Research and development progress of dynamic recrystallization in pure magnesium and its alloysThe Chinese Journal of Nonferrous Metals
-
T. Mino, M. Asakawa, D. Lee, T. Fujiwara, K. Matsuzaki, M. Kobayashi (2006)
Twin-roll strip casting of AZ61 magnesium alloy and improvement of formability by structure-control rollingJournal of Materials Processing Technology, 177
-
H. Watari, T. Haga, N. Koga, K. Davey (2007)
Feasibility study of twin roll casting process for magnesium alloysJournal of Materials Processing Technology, 192
-
M. Pérez-Prado, O. Ruano (2002)
Texture evolution during annealing of magnesium AZ31 alloyScripta Materialia, 46
-
Zhiyi Liu, Song Bai, S. Kang (2009)
Low-temperature dynamic recrystallization occurring at a high deformation temperature during hot compression of twin-roll-cast Mg–5.51Zn–0.49Zr alloyScripta Materialia, 60
-
F. Humphreys, M. Hatherly (1995)
Recrystallization and Related Annealing Phenomena -
Yusuke Nakaura, A. Watanabe, K. Ohori (2006)
Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Strip Produced by Twin Roll CastingMaterials Transactions, 47
-
Jin‐Chong Tan, M. Tan (2003)
Dynamic continuous recrystallization characteristics in two stage deformation of Mg-3Al-1Zn alloy sheetMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 339
-
V. Erukhimovitch, J. Baram (1996)
Modeling recrystallization kineticsMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 214
-
S. Park, G. Bae, D. Kang, I. Jung, K. Shin, N. Kim (2007)
Microstructure and tensile properties of twin-roll cast Mg-Zn-Mn-Al alloysScripta Materialia, 57
-
J. Jonas, X. Quelennec, Lan Jiang, Ė. Martin (2009)
The Avrami kinetics of dynamic recrystallizationActa Materialia, 57
-
Z. Pan (2006)
Kinetics of recrystallization for AZ31B magnesium alloyThe Chinese Journal of Nonferrous Metals
- Publisher
- Springer Journals
- Copyright
- Copyright © 2011 by University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg
- Subject
- Material Science; Materials Science, general; Metallic Materials; Characterization and Evaluation of Materials; Ceramics, Glass, Composites, Natural Methods; Surfaces and Interfaces, Thin Films; Tribology, Corrosion and Coatings
- ISSN
- 1674-4799
- eISSN
- 1869-103X
- DOI
- 10.1007/s12613-011-0479-9
- Publisher site
- See Article on Publisher Site
Abstract
The kinetics of recrystallization for twin-roll casting AZ31 magnesium alloy with different thicknesses during homogenization was analyzed. It is shown that fine grains are first formed at the boundaries of deformed bands in the twin-roll casting slab. The recrystallized grains with no strain are gradually substituted for the deformed microstructure of twin-roll casting AZ31 magnesium alloy. The incubation temperature and time for the recrystallization of a twin-roll casting AZ31 magnesium alloy strip with a thickness of 3 mm are lower and shorter than those of the 6-mm thick strip, respectively. The 3-mm thick twin-roll casting magnesium alloy has finer grains than the 6-mm thick strip. The activation energies of recrystallization for twin-roll casting AZ31 magnesium alloy slabs with the thickness of 3 and 6 mm are 88 and 69 kJ/mol, respectively. The kinetics curves of recrystallization for twin-roll casting AZ31 magnesium alloy were obtained.
Journal
International Journal of Minerals, Metallurgy, and Materials – Springer Journals
Published: Oct 4, 2011