Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 7-Day Trial for You or Your Team.

Learn More →

Enhanced mechanical properties of self-polymerized polydopamine-coated recycled PLA filament used in 3D printing

Enhanced mechanical properties of self-polymerized polydopamine-coated recycled PLA filament used... http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Applied Surface Science CrossRef

Enhanced mechanical properties of self-polymerized polydopamine-coated recycled PLA filament used in 3D printing

Zhao, Xing Guan; Hwang, Kyung-Jun; Lee, Dongoh; Kim, Taemin; Kim, Namsu
Applied Surface Science , Volume 441: 381-387 – May 1, 2018
Download PDF
Loading next page...
 
/lp/crossref/enhanced-mechanical-properties-of-self-polymerized-polydopamine-coated-tc4FhfXoQn

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
CrossRef
Copyright
© 2018 Elsevier B.V. All rights reserved.
ISSN
0169-4332
DOI
10.1016/j.apsusc.2018.01.257
Publisher site
See Article on Publisher Site

Abstract

Journal

Applied Surface Science – CrossRef

Published: May 1, 2018

References

  • Finite element analysis of the thermal behavior of a RepRap 3D printer liquefier
    Jerez-Mesa
  • Development of a large, low-cost, instant 3D scanner
    Straub
  • Emissions of ultrafine particles and volatile organic compounds from commercially available desktop 3D printers with multiple filaments
    Azimi
  • Polymer recycling codes for distributed manufacturing with 3-D printers
    Hunt
  • Emissions of ultrafine particles and volatile organic compounds from commercially available desktop three-dimensional printers with multiple filaments
    Azimi
  • Plastic waste and the environment
    Duval
  • Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
    Kreiger
  • Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy
    Al-Itry
  • Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)
    Pillin
  • Recycling of waste from polymer materials: an overview of the recent works
    Hamad
  • Influence of processing parameters on the degradation of poly(L-lactide) during extrusion
    Taubner
  • Thermal and mechanical properties of chemical crosslinked polylactide (PLA)
    Yang
  • The effects of dioctyl phthalate plasticization on the morphology and thermal, mechanical, and rheological properties of chemical crosslinked polylactide
    Yang
  • Mussel-inspired surface chemistry for multifunctional coatings
    Lee
  • Facile conjugation of biomolecules onto surfaces via mussel adhesive protein inspired coatings
    Lee
  • Substrate-independent and large-area synthesis of carbon nanotube thin films using ZnO nanorods as template and dopamine as carbon precursor
    Gong
  • One-step modification of superhydrophobic surfaces by a mussel-inspired polymer coating
    Kang
  • Mimicking mussel adhesion to improve interfacial properties in composites
    Hamming
  • Interfacial crystallization enhanced interfacial interaction of poly (butylene succinate)/ramie fiber biocomposites using dopamine as a modifier
    Zhou
  • Catecholamine polymers as surface modifiers for enhancing interfacial strength of fiber-reinforced composites
    Lee
  • Novel poly-dopamine adhesive for a halloysite nanotubes Ru(bpy) electrochemiluminescent sensor
    Xing
  • Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
    Kao
  • Mussel-inspired polydopamine modification of supports for the facile synthesis of zeolite LTA molecular sieve membranes
    Yuan
  • Anisotropic material properties of fused deposition modeling ABS
    Ahn
  • Novel polymer nanocomposites from bioinspired green aqueous functionalization of BNNTs
    Thakur
  • Biomimetic composite scaffolds based on surface modification of polydopamine on electrospun poly(lactic acid)/cellulose nanofibrils
    Yang
  • Performance enhancement of polylactide by nanoblending with POSS and graphene oxide
    Pramoda
  • Surface enhanced Raman scattering (SERS) and FTIR characterization of the sepia melanin pigment used in works of art
    Centeno